Skontaktuj się z nami

Complete sensor system for efficient certified and approved CIP cleaning

Przetwory mleczne, Przemysł spożywczy

Röck Milchtransport GmbH & Co. KG has specialised in milk transport for almost 40 years. For its own truck cleaning needs, but also as a service for other forwarders and other food products such as chocolate or jam, it has recently started operating its own modern CIP system. The high quality of the processes is proven by corresponding certificates according to SQAS and the ECD (European federation of tank cleaning organisations Cleaning Document). The complete equipment with Anderson-Negele sensors ensures the high efficiency of the entire installation.

Application Brochure:



"With this plant we have broken new ground in our own business. The consultation already in the planning phase was very intensive and professional. For the operational start-up, we still had questions in order to optimally coordinate the entire plant and to bring it to optimum efficiency. At our request, a specialist from Anderson-Negele‘s technical service personally supported us. Since then everything has been running smoothly, virtually maintenance- free and to our complete satisfaction."

— Christoph Röck, General manager

The Anderson-Negele solution

The advantages of the application:

  • Complete process sensor technology for reliable and sustainable CIP cleaning from a single source
  • Inline measurement of critical parameters enables precise process control and thus a verifiable quality for the certification of the cleaning
  • High measuring accuracy and short reaction times ensure resource efficiency (e.g. saving of cleaning agents, reduction of waste water volume)

Szczegóły zastosowania

The application

The CIP system consists of four tanks for fresh water, cleaning agents, returns and waste water and the parallel cleaning system for up to three trucks. The independent process lines are designed for fast, hygienic operation that is equally optimized in terms of ecological and economic aspects. From the tanks installed in the basement, the cleaning media are pumped upwards into the milk or food trucks and flow back from there through hydrostatic pressure. In contrast to the otherwise frequently practiced „lost process“, the circulation and multiple recycling of the cleaning agents was a crucial requirement here due to environmental protection and cost aspects.

The CIP cleaning takes place in three stages:

  1. pre-rinsing with water from the return tank
  2. CIP cleaning with 1-phase cleaner, then depending on concentration either recirculation into cleaning agent tank or discharge into return tank
  3. flushing with fresh water with discharge into the return tank

For reliable and certifiable cleaning and maximum utilization of the cleaning agents, temperature, conductivity and flow rate must correspond exactly to the specifications. These values are controlled permanently and with the utmost precision inline.

For all applications in the overall process the Anderson-Negele sensors were able to offer the appropriate solution, thus ensuring optimum function, efficiency and process reliability for the customer.

The Anderson-Negele solution

Different measuring methods ensure process reliability for the tanks. Capacitive level detectors NCS-M-11, installed at the top and bottom, transmit the full or empty signal to the PLC with the shortest reaction time in order to reliably prevent overflow during filling or pump idling. Type L3 pressure sensors are used for permanent volume measurement and to monitor the exact filling level. The temperature is continuously measured by dead-leg optimized TFP-161 sensors.

For correct cleaning, the media must always be pumped into the truck and their integrated spray heads with a specified, optimum pressure. Installed right after the pump, electromagnetic flow meters FMQ and pressure transmitters DANHH monitor accurately this process step. After the cleaning process, the media are analyzed inline and their return to the corresponding tanks is monitored by calorimetric flow switches of type FTS-141.

The analysis of the return media is one of the most important steps for an environmentally friendly and cost-efficient process. The ILM-4 inductive conductivity meter plays a central role in precisely determining the phase separation: during the discharge of the liquids at each cleaning stage the media are differentiated with cost-saving accuracy. Re-usable cleaning agent that flows off after cleaning can thus be returned to the tank to the maximum possible degree. In a separate, internal circulation and for permanent optimum cleaning result, its concentration is adapted to the specified ideal value by re-dosing with detergent and fresh water in the cleaning agent tank. The ILM-4 conductivity meter also ensures the highly precise measurement of conductivity and temperature required here.

Produkty powiązane