Filters

Technologies

Measurement:

PHARMadapt ESP: temperature measurement with immersion sleeve, without media contact

With the ESP installation system, an immersion sleeve is permanently integrated into the process. The slim probe tip of the temperature sensor is inserted into this immersion sleeve and kept in contact by means of a spring. It is therefore not in contact with the media.......

Read More

Installation system CPM: Dead space-free, front-flush installation of pressure sensors even in pipes with a small nominal diameter

For pipes with a small nominal diameter, the CPM installation system offers a process connection that is easy and safe to install and offers unique advantages thanks to its special design.......

Read More

3-A Sanitary Standards Compliance

In 1920 three US associations published directives for milk pipe connections. Hence the name 3-A, for 3 Associations.......

Read More

ASME Compliance

......

Read More

FDA Compliance

The "Food and Drug Administration" (FDA) is a US authority that issues approvals for agents, foodstuffs, cosmetics and pharmaceutical products. In addition, it generates recommendations for the use of materials in facilities in the foodstuffs and pharmaceutical industries.......

Read More

USP Class VI Standard

Relative new and initialized from US market is a new qualification of product contacting plastics. Primary a requirement from the medical sector this will get a standard of the pharmaceutical industries in the future for a lot of applications.......

Read More

Surface Quality

In order to provide favourable conditions for sterile production, the surface must be smooth and non-porous down into the microscale range. Overlapping areas, or material laminations, must be avoided as far as possible on account of the dead spaces that result, since these areas are difficult or impossible to ......

Read More

EHEDG Certification

The European Hygienic Engineering & Design Group (EHEDG) was founded in 1989 as a non-profit consortium of equipment manufacturers, food producers, suppliers to the food industry, research institutes and universities, public health authorities and governmental organisations.......

Read More

ISO 9001 Quality Management System

A quality management standard such as ISO 9001 describes which requirements the management system of a company must meet in order to comply with a certain standard in the implementation of quality management. ......

Read More

Delta Ferrite Content

The higher the delta ferrite content (DF), the more magnetic phases are present in the austenitic structure. These arise as a result of thermal effects, e.g. during welding and turning. The strain-induced martensite that is formed here leads to increased susceptibility to corrosion for the workpiece and is ......

Read More

Inductive conductivity in hygienic applications

An alternating current flowing in the primary coil (transmitter) generates an alternating magnetic field which induces a current in the medium. The current flow in the medium in turn generates a magnetic field which induces a voltage and thus a current flow in the secondary coil (receiver) of the sensor. ......

Read More

Pressure cells and measuring ranges

Anderson-Negele pressure sensors work optionally with pressure cells for relative pressure, for absolute pressure or for compound pressure.......

Read More

Hygienic pressure manometer

Special long-life technology ensures high measurement sensitivity and durability for pressure manometers......

Read More

Flex-Hybrid Technology (IO-Link & 4…20 mA)

Sensors with digital IO-Link communication in Flex-Hybrid technology make planning, commissioning and operation of your systems easier, faster and more flexible. In other words: you are your key to greater efficiency!......

Read More

Sentinel DFI (Diaphragm Failure Indidation)

With conventional pressure sensors, in case of diaphragm damage the product can get into contact with actuation fluid. The special “Sentinel DFI” (Diaphragm Failure Indication) technology offers a reliable remedy.......

Read More

Clean-In-Place (CIP) optimization with sensor technology

Clean-In-Place (CIP) process technology enables fast and efficient cleaning of production equipment without dismantling the components. With automation based on sensor technology, it offers significantly less labor, reduces production downtime, and protects employees from direct contact with aggressive cleaning chemicals. ......

Read More

Operating principles of Turbidity measurement

Often, liquids are falsely called dull, even though they are not. Turbidity is caused by small particles in transparent solids, in a liquid or gas that have a different refractive index than the liquid itself. Haze is easily detectable if, for example, a liquid looks milky. The functional principles of ......

Read More

Inductive conductivity measurement

Alternating current flowing through a primary coil (emitter) induces an alternating magnetic field, which in turn induces a current in the surrounding medium. The current flow in the medium on its side produces a magnetic field which induces a tension and consequently a flowing current in the secondary coil (receiver). ......

Read More