PHARMadapt ESP: temperature measurement with immersion sleeve, without media contact

With the ESP installation system, an immersion sleeve is permanently integrated into the process. The slim probe tip of the temperature sensor is inserted into this immersion sleeve and kept in contact by means of a spring. It is therefore not in contact with the media. The sensor can be removed at any time without electrical separation and without opening the process, e.g. for recalibration or replacement, without system downtime or process stop.

Technologies Details

The ESP installation system offers the perfect installation situation for every application, in all pipes and tanks due to the following details:

As needed: Special versions available for pharmaceutical applications
Variable: It is installed in tanks using weld-in sleeves or adapters and in pipes using T-pieces or angle elements with integrated immersion sleeves
SFast and highly accurate: t50 Response time from 4.4 seconds, measuring accuracy <± 0.25 ° C
One for all: Only one type of sensor with the same sensor length for different pipe nominal widths, resulting in low spare parts inventory and planning effort
Reliable: With spring-loaded tip for perfect contact
Maximum hygienic: No product contact, so that there is no risk of old products, foreign bodies and germs entering via the sensor
Easily cleanable: : Simple CIP / SIP cleaning due to the design with no dead space
Certified quality: : DThe built-in system PHARMadapt ESP complies with the current norms, specifications and standards such as 3-A, FDA, USP …
The following temperature sensors are suitable for the ESP built-in system:
- - TSMF Temperature Sensor Mini Food
  - TSMP Temperature Sensor Mini Pharma
You can find an overview of all process adaptation systems and the sensors suitable for them in the brochures Process adaptations food and Process adaptations Pharma.

Find Distributor