Digital + Analog: The best of two worlds
For the safe process control of an entire plant technology with a large number of measuring points, control and actuation devices, IO-Link offers significant advantages. After extensive testing of its practical suitability, we transfer this technology as a digital data transfer standard of the future on all measurement categories. We rely on our Flex-Hybrid technology with IO-Link parallel to the analog 4…20 mA connection./p>
Data highway instead of one-way street
Installation and commissioning of sanitary IO-Link sensors are extremely time- and cost-saving. A three-pole standard cable without special shielding is sufficient for the bidirectional, interference-free signal transmission and power supply. In practice, the point-to-point connection at the field level is established from various sensors to IO-Link masters and from there, via field bus systems, to the PLC.
From simple data transfer to intelligent communication
With IO-Link sensors, data streams are also possible in the opposite direction, towards the devices. Each sensor can therefore be parameterized independently of the manufacturer via an IO-Link master. For an optimal process adaptation, specific settings such as measuring ranges or adjustments can be carried out on site. The status of operating conditions can be checked and queried explicitly at any time. Potential malfunctions, signs of wear, or an increased risk of failure can be detected early, and condition-dependent and production downtimes can be better avoided.
“Plug-and-play” takes on a new meaning
With IO-Link, sensor replacement is more comfortable and safer than ever before and can be performed independently, at any time, and by any employee without any programming effort. For this purpose, the device configuration of each connected sensor can be stored in the IO-Link master. The new sensor will automatically be recognized, configured, and parameterized by the IO-Link master and is immediately operational.
Copyright © 2022 Anderson-Negele