WEIGH II CONTROLLER

Weighing Systems, Kistler-Morse Weighing Solutions

Multi-Vessel Weight Indicator with Local Display

The Weigh II controller is a fully featured weighing controller that can monitor up to four separate vessels,  consolidating the vessel signals into one single location, saving control room panel space and reducing installation wiring.

  • Operator Interface: 2×16 Characters, back-lit LCD, Tactile Switches
  • Displays weight as bar graph or digital readout to meet customer preferences
  • Accepts input signals from half and full bridge strain gauge load cells
  • Easy to set up and calibrate without test weights or special load cells
  • Interface Options: AB RIO, 4-20mA, Serial

Math Channels and Split Silos

Split silos can be difficult to get a weight measurement because the material and structure may not be symmetrical; the Weigh II Math Channel feature allows equations to be written that combine multiple raw sensor input with mathematical formulae to create accurate output.

Remove Vibration Noise with Sentry DSP™ Filter

The filter digitally separates the changes in the vessel due to vibrations and dynamic conditions of vessels with mixers to give more accurate readings.

Enclosure Options

Polyester coated aluminum, plastic and stainless steel enclosures available for different environments, including NEMA 4X requirements.

Technical Specification

Temperature range process -5° to 122° F (-20° C to 50° C)
Operating pressure 110 to 120/230 VAC 50/60Hz or 24 VDC or 100 VDC
Technical Specification (Approvals)

CE

Technical Specification (Resolution)

Selectable 16 bits (1 part in 65,536) to 21 bits (1 part in 2,097,152) in 1 bit increments

Technical Specification (Transducer/Sensor Input)

All Kistler-Morse sensors (half or full-bridge)

Download

User manuals: