Food, Beverage and Dairy

Food, Beverage and Dairy

ITM-4 Four-beam turbidity meter

We offer Turbidity measurement for very low turbidities in pipes from DN25

Active phase separation also for media with low turbidity from 0 to 5000 NTU
Glass-free sapphire optics with pollution compensation
Compact device, no separate evaluation unit necessary
For increased efficiency in production processes such as separator automation, lauter tun control and filter monitoring
Reliable fresh and waste water control
Units NTU and EBC switchable (11 ranges per unit)
4 free selectable and externally switchable measurement ranges
smallest measurement range 0…5 NTU resp. 0…1 EBC
highest measurement range 0…5000 NTU resp. 0…1250 EBC
Colour independent measurement principle (wave length 860 nm)

ROI Calculator

Does the installation of a turbidimeter pay off financially? Calculate that here with just a few clicks:

Configure & Request Quote

Key Benefits:

English Deutsch Français

Product Information:

English Deutsch Français Polski

Process Connection	Tri-Clamp \| DIN flange \| Milk tube\| Hygienic thread
Wetted material	Stainless steel 1.4404 (316L), Ra≤0.8 μm \| PEEK \| Optics sapphire
Measuring range	0…5.000 NTU \| 0…1.250 EBC
Accuracy	±2% of the measurement value
Available versions	Compact
Temperature range process	0…100 °C
Temperature range CIP/SIP	130 °C / max. 30 min.
Operating pressure	max. 10 bar
Communication	4…20 mA, PNP
Product Technology Range	Click here to view back our Turbidity Sensors

The values shown are the performance limits within the product line. The product-specific data for each individual configuration can be obtained from the product information