Contact Us

Life Sciences
Life Sciences

PHARMadapt ESP

Adapters & Fittings

Gap free process connection for temperature measurement without process opening. Suitable for pipes from DN10 on.

With the ESP installation system, an thermowell is permanently installed in the process. The slim tip of the sensor is inserted into this thermowell and held in contact by a spring. It is therefore not in direct contact with the medium.
The sensor can be removed at any time for recalibration or replacement, without electrical disconnection and without opening the process, and consequently without necessity to shut down the plant or to stop the process.

  • Variable: Installation in tanks using welding sockets or adapters. Installation in pipes using tees or elbows with integrated thermowells
  • One for all: One sensor type with the same probe length can be used for differing pipe widths, thus minimizing spare parts inventory and planning requirements
  • Tailored to requirements: Special design for pharmaceutical applications
    For an overview on all advantages and benefits of our process connections we recommend our brochure “Hygienic installation systems for Pharma Applications”. You can open the PDF by clicking here
Key Benefits:
Product Information:

Technical Specification

Process ConnectionPHARMadapt ESP Weld-in thermowells | Adapters | Pipe Tees | Pipe elbows
Wetted material1.4435 (316L) | Ra ≤ 0,8 μm / 0,6 μm / 0,4 μm
Available versionsFor temperature sensors TFP with head 50 or 18 mm for PHARMadapt ESP
The values shown are the performance limits within the product line. The product-specific data for each individual configuration can be obtained from the product information

Download

Key Benefits:
Product Information:

Process Connection

Configure sensor and send request