Gap free process connection for temperature measurement without process opening. Suitable for pipes from DN10 on.
Know more about different types of hygienic Adapters & Fittings by Anderson-Negele.
Key Feature of the PHARMadapt ESP System is a thermowell which is permanently installed in the process line. The slim tip of the sensor is inserted into this thermowell and keeps direct contact by a spring. It is therefore not in direct contact with the medium.
The sensor can be removed at any time for recalibration or replacement, without electrical disconnection and without opening the process, and consequently without necessity to shut down the plant or to stop the process.
|Process Connection||PHARMadapt ESP Weld-in thermowells | Adapters | Pipe Tees | Pipe elbows|
|Wetted material||1.4435 (316L) | Ra ≤ 0,8 μm / 0,6 μm / 0,4 μm|
|Available versions||For temperature sensors TFP with head 50 or 18 mm for PHARMadapt ESP|
|The values shown are the performance limits within the product line. The product-specific data for each individual configuration can be obtained from the product information|