With the ESP installation system, an immersion sleeve is permanently integrated into the process. The slim probe tip of the temperature sensor is inserted into this immersion sleeve and kept in contact by means of a spring. It is therefore not in contact with the media.......
For pipes with a small nominal diameter, the CPM installation system offers a process connection that is easy and safe to install and offers unique advantages thanks to its special design.......
The European Hygienic Engineering & Design Group (EHEDG) was founded in 1989 as a non-profit consortium of equipment manufacturers, food producers, suppliers to the food industry, research institutes and universities, public health authorities and governmental organisations.......
A quality management standard such as ISO 9001 describes which requirements the management system of a company must meet in order to comply with a certain standard in the implementation of quality management. ......
To provide favourable conditions for sterile production, the surface must be smooth and non-porous down into the microscale range. Overlapping areas, or material laminations, must be avoided as far as possible on account of the dead spaces that result, since these areas are difficult or impossible to clean and ......
Relative new and initialized from US market is a new qualification of product contacting plastics. Primary a requirement from the medical sector this will get a standard of the pharmaceutical industries in the future for a lot of applications.......
The "Food and Drug Administration" (FDA) is a US authority that issues approvals for agents, foodstuffs, cosmetics and pharmaceutical products. In addition, it generates recommendations for the use of materials in facilities in the foodstuffs and pharmaceutical industries.......
In the pharmaceutical sector one often comes across the requirement to deliver tubes to meet ASME. In most cases what is meant here is simply the tube dimen-sions with regard to diameter and wall thickness. In this event ASME is identical with the ODT dimensions. However, ASME BPE also ......
In 1920 three US associations published directives for milk pipe connections. Hence the name 3-A, for 3 Associations.......
An alternating current flowing in the primary coil (transmitter) generates an alternating magnetic field which induces a current in the medium. The current flow in the medium in turn generates a magnetic field which induces a voltage and thus a current flow in the secondary coil (receiver) of the sensor. ......
Anderson-Negele pressure sensors work optionally with pressure cells for relative pressure, for absolute pressure or for compound pressure.......
Special long-life technology ensures high measurement sensitivity and durability for pressure manometers......
Sensors with digital IO-Link communication in Flex-Hybrid technology make planning, commissioning and operation of your systems easier, faster and more flexible. In other words: you are your key to greater efficiency!......
Cleaning In Place (CIP) process technology enables fast and efficient cleaning of production equipment without dismantling the components. As a result, this technique offers significantly less labor, it reduces production downtime, and it protects employees from direct contact with aggressive cleaning chemicals. ......
Often, liquids are falsely called dull, even though they are not. Turbidity is caused by small particles in transparent solids, in a liquid or gas that have a different refractive index than the liquid itself. Haze is easily detectable if, for example, a liquid looks milky. The functional principles of ......
Alternating current flowing through a primary coil (emitter) induces an alternating magnetic field, which in turn induces a current in the surrounding medium. The current flow in the medium on its side produces a magnetic field which induces a tension and consequently a flowing current in the secondary coil (receiver). ......
Copyright © 2022 Anderson-Negele