Pressure Sensors | Anderson-Negele

Pressure Sensors

In almost all processes in dairies, breweries, and in the food, beverage and pharmaceutical industry, pressure control contributes significantly to ensuring the efficiency of the processes, guaranteeing constant product quality, avoiding plant downtimes,...

Hygienic Pressure Sensors for Food, Beverage, and Life Sciences

In industries such as dairy, brewing, beverage production, winemaking, and juice processing, accurate pressure measurement is crucial for maintaining process efficiency and product quality. Our high-precision pressure sensors ensure reliable monitoring of process pressure while providing essential protection against contamination. In the life sciences sector, where stringent material quality and exact pressure adherence are paramount, our specialized pressure devices meet the demanding requirements of pharmaceutical and biotechnical applications. We offer a variety of options, including sensors for low and high pressures, differential pressure measurement, and remote pressure monitoring, to suit diverse operational needs.﻿

Applications for Hygienic Pressure Sensors

Pressure instruments serve various applications across industries:
﻿
Process pressure control:
﻿
In many production processes or in CIP/SIP processes, inline pressure sensors ensure that the specified positive or negative pressure values in pipes, tubes, lines, process vessels, storage tanks, bioreactors or other containers is maintained. Pressure transmitters and manometers with switching output can report the deviation to the PLC via an alarm signal, so that an automatic, immediate reaction or protective measure can be triggered.
﻿
Hydrostatic level control:
﻿
With pressure sensors, the level in containers can be determined and transmitted with the highest precision where other level measurement techniques are not possible or not precise enough due to tank size, design, materials, media or other reasons.
﻿
Hydrostatic volume control:
﻿
Intelligent pressure sensors with integrated tank linearization can even go one step further: the combination of level, tank geometry, density compensation and temperature compensation allows the volume or mass in pounds, gallons, % to be transmitted directly and with maximum precision at any time and for any medium.
﻿
Differential pressure control:
﻿
By equipping a pressure sensor with two sensor stems and signal converters the parallel detection of two pressure values is possible. This allows for the precise measurement of the differential pressure in a pressurized vessel and thus at same time both the precise metering of the level and the monitoring of the head pressure in a pressure tank, such as a fermenter tank, a sterile tank or a juice storage tank. This digital measuring system is easy to install, does completely without capillaries, is reliable and safe. It can be used to monitor the risk of contamination due to a drop in pressure or the post-fermentation in juice production.

Designs of hygienic pressure sensors

Pressure sensors are classified according to their design into mechanical pressure gauges and electronic pressure transmitters.﻿﻿Pressure Gauges:﻿﻿being mechanical pressure sensors with display, transmit the measured value in analog or digital form directly to an on-site display. There are also pressure gauges with switching output which, as analog pressure switches or digital pressure switches, can transmit the measured value for process control or as an alarm signal to the PLC control center.﻿

Electronic pressure transmitters:
﻿
work with an internal piezoelectric signal converter. They can indicate the measured value in a display, transmit it to the PLC or process it in their intelligent electronic unit itself with other measured data such as temperature. This means that for any requirement a suitable measurement technology with convenient data detection, processing and transmission is available. Another differentiation is the material used for the pressure diaphragm or pressure cell.

Stainless steel diaphragms:﻿﻿These are used in most versions of Anderson-Negele pressure sensors. Depending on the application and medium, the stainless-steel grade and surface roughness can be selected individually.﻿﻿Hygienic design:﻿﻿Anderson-Negele pressure sensors are developed according to the “HYGIENIC BY DESIGN” principle and comply with the principles and specifications of institutions and organizations such as 3-A, FDA or EHEDG with regard to the criteria for non-dead-leg installation, cleanability, material quality and handling.﻿

Pressure cells and measuring ranges

Anderson-Negele pressure sensors are available with pressure cells for relative pressure, for absolute pressure or for compound pressure.
﻿
With relative pressure cells the back of the membrane is vented, i.e. the sensor measures the positive pressure relative to atmospheric pressure.
﻿
In absolute pressure cells, the vacuum generated during the manufacturing process remains between the diaphragm and the base body, i.e. the sensor measures the pressure in relation to the vacuum as a reference point. Absolute pressure measurement is selected to eliminate the influence or variation of atmospheric air pressure.
﻿
Compound pressure cells allow a relative measurement with vacuum range.
﻿
Measuring ranges: A large selection of measuring ranges, i.e. the difference between lower and upper maximum value (e.g. 0…6 PSI / -30”HG/0/500 PSI) allow a specific and precise adaptation to all process conditions. Even very low pressures up to 0…0.6 PSI are possible by turndown

Hygienic Pressure Transmitters

Anderson-Negele provides a comprehensive product range from robust, low-cost pressure transmitters for standard process requirements up to intelligent pressure sensors with high-end equipment a sophisticated feature for full automation. Even for the most difficult processes it’s possible to find the best suitable and most economical device for every requirement, every process and every application:

High process temperatures: Special high temperature pressure sensors allow process temperatures up to 480°F.

High pressure: Some applications, such as homogenizers, work with very high pressures. Anderson-Negele offers pressure gauges suitable for pressures up to 15,000 psig.

Overpressure resistance: In some processes, strong pressure surges can occur, which can damage the pressure sensor. In this case a sensor with a high overpressure resistance should be used. At Anderson-Negele, variants with an overpressure resistance of 580 PSI are available.

Field Repair: Modular pressure sensors with Smart Replace Design allow easy on-site replacement of components, simplifying spare parts inventory and increasing sensor availability.

Temperature compensation: With hydrostatic level measurement, a temperature drift can lead to inaccurate output values. With Anderson-Negele sensors the deviation due to the temperature effect is up to 10 times lower than with conventional pressure sensors.

Turndown: Even with turndown up to 10:1, the measurement accuracy at Anderson-Negele remains up to 0.15% due to the use of the calibrated measurement range as reference.

Pressurized tanks: For pressurized tanks, a differential pressure sensor with two sensor stems is the best solution for high-precision level or volume measurement.

Small tube diameters: The larger the diaphragm diameter, the higher the measuring accuracy. However, this becomes a problem with very small pipelines. This can be overcome by process adaptation with the CPM and CPM Mini adapter systems. These enable pressure sensors with standard diaphragms even for pipe diameters of only ¼”. Further information can be found in the product category Process adaptations.

Hygienic design / Hygienic materials

The pressure meters are made of the highest quality materials. Depending on type and intended application, the following materials and surfaces can be selected:

Components in contact with the medium: Stainless steel 1.4404 (316L) / 1.4435 (316L)

Pressure cells: Stainless steel 1.4404 (316L) / 1.4435 (316L) / C276 Hastelloy.

Surface roughness up to Ra≤8 microinches (electropolished)
A 3.1 material certificate is available for pharmaceutical applications.

Due to their extremely robust and durable design, the sensors can withstand even the highest mechanical stresses such as vibrations and pressure shocks, which occur repeatedly in many real-world applications, and permanently ensure the highest precision.

Process adaptations / Installation

A large number of different process adaptations ensure great flexibility with regard to installation in new plants and retrofitting in existing processes, tanks or pipes. In addition to pressure sensors with hygienic thread, tri-clamp connection or even O-ring seals, there are also variants that can be installed in pipelines with smallest nominal diameters from 1/4″.